Recommended Bibliography

Here is a list of recommended works related to film cooling and minimally intrusive diagnostics.

Film Cooling (General)

1. Weighardt, K. “Hot Air Discharge for De-Icing,” Air Material Command, AAF Trans. No. F-TS-919 RE, Dec. 1946
2. Tribus, M., Klein, J., “Forced Convection from Non-Isothermal Surfaces,” Heat Transfer, a Symposium, University of Michigan, Ann Arbor, 1953.
3. Hartnett, J.P., Birkebak, R.C., Eckert, E.R.G, “Velocity Distributions, Temperature Distributions, Effectiveness and Heat Transfer for Air Injected Through a Tangential Slot Into a Turbulent Boundary Layer,” Journal of Heat Transfer, pp. 293-306, August 1961
4. Seban, R.A., Back, L.H., “Velocity and Temperature Profiles in a Wall Jet,” Int. J. Heat Mass Transfer, Vol. 3, pp. 255-265, 1961
5. Stollery, J.L, El-Ehwany, A.A.M, “A Note on the Use of a Boundary-Layer Model for Correlating Film-Cooling Data,” Int. J. Heat Mass Transfer, Vol. 8, pp. 55-65, 1965
6. Goldstein, R.J., “Fim Cooling,” Advances in Heat Transfer, Vol. 7, Academic Press, New York, pp. 321-378, 1971
7. Ballal, D.R., Lefebvre, A.H., “Film-Cooling Effectiveness in the Near-Slot Region,” Journal of Heat Transfer, pp. 265-266, May 1973
8. Simon, F.F, “Jet Model for Film Cooling With Effect of Free-Stream and Coolant Turbulence,” NASA Technical Paper 2655, October 1986
9. Marek, C.J., Tacina, R.R., “Effect of Free Stream Turbulence on Film Cooling,” NASA Technical Note D-7958, 1975
10. Bons, J.P, MacArthur, C.D., Rivir, R.B., “The Effect of High Freestream Turbulence on Film Cooling Effectiveness,” Int. Gas Turbine and Aeroengine Technology Report, 1994
11. Taslim, M.E., Spring, S.D., Mehlman, B.P., “An Experimental Investigation of Film Cooling Effectiveness for Slots of various Exit Geometries,” Journal of Thermophysics and Heat Transfer, Vol. 6, No. 2, April-June 1992

Film Cooling (PIV)

1. Gogineni, S.P., Pestian, D.J., Rivir, R.B., Goss, L.P., “PIV Measurements of Flat Plate Film Cooling Flows With High Free Stream Turbulence,” AIAA 34th Aerospace Sciences Meeting and Exhibit, AIAA Paper 96-0617, January 1996
2. Peterson, S., “Structural Features of Jets-In-Crossflow for Film-Cooling Applications,” 41st Aerospace Sciences Meeting and Exhibit, AIAA Paper 2003-303, January 2003
3. Polanka, M.C., Cutbirth, J.M., Bogard, J.D., “Three Component Velocity Field Measurements in the Stagnation Region of a Film Cooled Turbine Vane,” Journal of Turbomachinery, Vol. 124, pp.445-452, July 2002
   

Film Cooling (IR Thermography)

1. Baldauf, S., Scheurlen, M., Schulz, A., Wittig, S., “Heat Flux Reduction From Film Cooling and Correlation of Heat Transfer Coefficients From Thermographic Measurements at Enginelike Conditions,” Journal of Turbomachinery, Vol. 124, pp. 699-709, October 2002
2. Schulz, A., “Infrared Thermography as Applied to Film Cooling of Gas Turbine Components,” Meas. Sci. Technology, Vol. 11, 2000

PIV (General)

1. Adrian, R.J., “Particle Imaging Techniques for Experimental Fluid Mechanics,” Annual Review in Fluid Mechanics, pp. 261-304, 1991
2. Westerweel, J., “Fundamentals of Digital Particle Velocimetry,” Measurement Science Technology, Vol. 8, pp. 1379-1392, 1997
3. Raffel, M., Willert, C., and Kompenhans, J., “Particle Image Velocimetry,” 1st edition, Springer-Verlag, 1998
4. Sousa, J.M.M, Freek, C., Pereira, J.C.F., Merzkirch, W., “Visualization Study of Near-Wall Flow Using a DIC-PIV System,” 8th International Symposium on Flow Visualization, 1998
5. Kaehler, C.J., “The Significance of Coherent Flow Structures for the Turbulent Mixing in Wall-Bounded Flows,” Dissertation zur Erlangung des Doktorgrades der Mathematisch-Naturwissenschaftlichen Fakultaten der Georg-August-Universitat zu Gottingen, 2004